EasyCap 2017 Drivers

EasyCAP drivers for Windows 8, 8.1 and 10

Update: I’ve moved EasyCAP driver file hosting to Google Drive as Google Cloud billing hit $100 AUD per month, EasyCAP driver downloads were 638 Gigibytes for the month of November! All links have been updated. 🙂

The EasyCAP converts an RCA or S-video source into a USB video and audio capture device – known as a Sound, video and game controller device in Windows – the possibilities for connecting analog sources to a Windows machine are endless and it’s priced insanely cheap.

All of this positive feedback stops when you connect it to a Windows machine – XP, 7, 8, 8.1 and now 10 – and realise there are hundreds of variations of this device produced with drivers designed specific to each variant with no original manufacturer to provide drivers or compatibility… at this point most users bin it and go on with their lives… I almost gave up too…

After a fortnight of driver hunting, driver conflicts, BSOD’s from resource conflicts and even ‘Windows driver paywalls’ – where you have to pay to download drivers for the EasyCAP – I got ‘my’ EasyCAP working as a video and sound capture device in Windows 8.1 (and Windows 10)!

Here’s the gotcha, ‘my’ EasyCAP – shown in packaging above but with labels on each cable – is sold on eBay, Amazon, etc. as the EasyCAP Capture USB 2.0 Video Adapter with Audio which is shared by every other variant out there but internally it is called the eMPIA Technology USB 2861 Device.

Unfortunately there is no way to tell what variant you have until you open the package and check the Device Properties for that Unknown Device showing within the Windows Device Manager and at that point you then can start looking for drivers that may be ‘compatible’ with – definitely not designed for – Windows 8, 8.1 or 10.

The eMPIA Technology USB 2861 Device has the following hardware details shown within the Windows Device Manager.

Screenshot from Windows 8.1 and Windows 10

screenshot-easycapw10
EasyCAP drivers working in Windows 10 connected using the RCA output of the EasyCAP device.

Manufacturer and Provider:

  • eMPIA Technology

Hardware IDs:

  • USB/VID_EB1A&PID_2861&REV_0100&MI=00
  • USB/VID_EB1A&PID_2861&MI=00

Below is a link to the Windows 7 drivers that were compatible with my EasyCAP device and further down a list of other EasyCAP drivers you can try. All of them require you to disable Windows Driver Signature from Advanced Startup; you can read about this from Sparkfun’s tutorial for Disabling Signed Driver Enforcement in Windows 8.

The driver package that worked in Windows 8.1 and now Windows 10:

I suspect this USB 2861 Device 5.8.306.0 – 3/6/2008 driver package hosted on the Microsoft Update Catalog is a newer driver release than the one I have working but I have not installed it so cannot confirm compatibility; in my mind, don’t fix something that ain’t broke…

Other driver packages and installers that might help other frustrated EasyCAP users (some are duplicates but different driver versions), good luck!

Note: Google Drive cannot scan ZIP archives over 85MB and EasyCAP_USBVID_1B71&PID_3002_FullCD.zip just happens to be 85MB, while EasyCAP CAPTURE USB 2.0 Video Adapter with Audio.zip is 151MB. It’s clean just wanted to give you heads up. All other download files are ~4MB up to 34MB.

I will host these driver packages as long as I can and mirror them if the server load is too high. Yup we hit the $100 AUD per month billing limit for file hosting, the downloads links are now direct links to Google Drive. If you have a question ask here in the comments as other readers may help you.

Published by

Michael Visser

I'm a WordPress Plugin developer, UAV & Raspberry Pi enthusiast and general tinkerer. This visser.io domain serves as my development playground for non-WordPress Plugin projects.

339 thoughts on “EasyCAP drivers for Windows 8, 8.1 and 10”

  1. For anyone else who will face this problem — insert EasyCAP into the USB port on the back of the system unit. Do not insert it into the USB-hub, monitor, or the front panel of the system unit. Personally, that’s what helped me.

  2. Hi guys. I’ve had a look on this site and it has been a great help.

    I managed to get my easycap device recognised by my Win 10 system but only audio is working for the time being.

    My device ID is USB\VID_1C88&PID_003C\SMIGRABBER9876543210

    So far I have only used the Easycap-by-Colour.zip (which got audio working)

    Any help getting video to work would be greatly appreciated.

    Thanks guys.

  3. Don’t bother trying to get it to work, the video quality is extremely poor. After hours of frustration I was able to get Easier Cap to work with my Windows 8.1 Dell laptop by changing the default mic setting on my computer and there was no need of installing unsigned drivers. I captured video from a VCR and camcorder, very disappointed in the result and regret buying the device, but I guess you get what you pay for.

  4. the driver stk1160.inf is STK1160 ATV BDA WORK PERFECT ON WIN 10 64, IS VERY IMPORTANT DISABLE DRIVER SIGNATURE, use this command bcdedit /set testsigning off after reboot pc force install manual the driver and good job 😉

  5. Hi, i’m on Windows 10, when i plugged it, was recognized automatically as a web cam (av to usb 2.0), it came with the ulea software wich is not working, however with OBS Studio i can capture audio but no video, i guess because a driver issue, but Windows don’t let to update them (best driver is already installed), i can’t find a solution, anyone knows how to fix it?

    1. Good day, every one I had a number of problems with my EasyCap on Windows 10 and tried most of the advice without success. The one at end that worked for me was very simple. I uninstalled the device. I downloaded a program called ‘DriverMax’ (sorry don’t remember the link) installed it and run it, it found sum drivers out dated, I looked for the Smi grabber driver in the list and select update. (be careful if you don’t want to pay for the program it will let you only download 2 drivers) Then used VLC player to view and record the video.

    2. Similar problem here. I’m running Windows 10 and my device has VID 18ec and PID 5555. The device is automatically recognized as USB2.0 PC CAMERA instead of video capture software. I tried all drivers mentioned in this post and couldn’t install any of them. I get both audio and image, but no colors at all. Tried AmCAP, Honestech, VirtualVCR, VirtualDUB, VideoView and VLC, in all available Video Standards. No success. Device sucks and anyone still selling any variant of this device in 2020 is only scamming customers.

    3. Hi,

      I’m trying to use an EasyCAP to plug into a tape deck and convert some tapes to mp3 audio. I’m having trouble getting my Windows 10 machine to even notice that it’s connected. How can I fix this?

      Thanks,
      ~Jhanek

      1. Best way to record audio on your computer is to download “Audacity” from https://www.audacityteam.org/ (It’s free & open source – but they gladly accept donations).
        Plug your analogue sound signal into your microphone port then tell Audacity to record from the microphone input… When you are finished editing, cuting and correcting, just go to “File” then “Export” (put in your information about the audio…) and Audacity saves the file as any type you want…

    4. I have been using my EasyCap for quite a few years now and even now with Windows 10 Pro 64bit mine did the same was recognized the minute I plugged it in as (av to usb 2.0). I use the program iSpy 64bit for security cameras and have had no problems with getting Video or Audio

  6. I bought and Easycap from Ebay in Sydney but it did not come with any software. I have Win 10 Pro x64 1909 and using Virtualdub 1.9112 or 2.

    I get the picture but it is manly a grey and has blotches of red and green sometimes.

    Below is the driver info. Can I do better than this one?

    ———————
    It shows in Dev Mgr under Camera as AV to USB2.0.
    Driver 21/06/2006 10.0.18362.815

    In Details..
    Device USB\VID_534D&PID_0021&MI_00\6&fea2084&0&0000 requires further installation.

    In Events..

    Device USB\VID_534D&PID_0021&MI_00\6&fea2084&0&0000 was not migrated due to partial or ambiguous match.

    Last Device Instance Id: USB\VID_1908&PID_2311&MI_00\7&48fc61f&0&0000
    Class Guid: {ca3e7ab9-b4c3-4ae6-8251-579ef933890f}
    Location Path:
    Migration Rank: 0xF000FFFF0000F120
    Present: false
    Status: 0xC0000719

    + System
    – Provider
    [ Name] Microsoft-Windows-UserPnp
    [ Guid] {96f4a050-7e31-453c-88be-9634f4e02139}
    EventID 20001
    Version 0

    Level 4
    Task 7005
    Opcode 0
    Keywords 0x8000000000000000

    – TimeCreated
    [ SystemTime] 2020-05-28T05:31:57.086050000Z
    EventRecordID 265058
    Correlation

    – Execution
    [ ProcessID] 6124
    [ ThreadID] 13828
    Channel System
    Computer WEBMAIN-NEW
    – Security
    [ UserID] S-1-5-18

    – UserData
    – InstallDeviceID
    DriverName usbvideo.inf_amd64_562f2630d9355017
    DriverVersion 10.0.18362.815
    DriverProvider Microsoft
    DeviceInstanceID USB\VID_534D&PID_0021&MI_00\6&FEA2084&0&0000

    SetupClass {ca3e7ab9-b4c3-4ae6-8251-579ef933890f}
    RebootOption false
    UpgradeDevice false
    IsDriverOEM false
    InstallStatus 0x0
    DriverDescription USB Video Device

    1. Got the same as you (VID en PID) also mainly gray image and sometime green purple lines.
      I did got software, tried other software but same result.

      Driver was autodetected by Windows 10 2004.

      VCR directly contected on TV doesn’t give lines, so USB grabber sucks.

  7. Indeed: the selling of EasyCap has to be forbidden as long as it gives problems with Windows. I had a Logilink too and it worked very good until recently (due to an update of Windows 10?).

  8. I have one of these devices with an AMT630a chip. I finally got it to work in only one software (VirtualDub) but the quality is really bad even though it’s an s-video and I’m using the proper s-video cable for it. The other capture programs don’t even see the device as a source.
    Any advice to make the display better and get other programs to see it? Maybe a different or better driver for it?

    My system: Windows 10 Pro 64
    Device Connection: USB 2.0
    Device Chip: AMT630A
    Device ID: USB\VID_18EC&PID_5555&REV_0100&MI_00
    USB\VID_18EC&PID_5555&MI_00

    1. I’ve got one with the same VID and PID as yours! Would you mind telling me wich driver pack you could make it work with?

  9. hi all
    I see I am not the only one with a “Product Key” problem.
    I have tried without success:
    VHS3G NMLGG HGGGE 82A42 DBMGD
    VHS3G NML9G 4GG9E H3345 DBM9D
    VHS2G FVLGG HGGG8 4E292 GFVGG
    TVR25 NMBGG HGGGH 362DC 6BMG6
    TRV25 NMBGG HGGGH 362DC 6BMG6
    Does anyone have any other suggestions? Please?

    1. ok not to feel too foolish, but 5 minutes after I posted this I found it.
      It was actually on the little cd in a .txt file.
      Hope this will help someone else though.

  10. I’ve run into a new problem. Newer Windows 10 1903 does not allow me to get to anywhere I can update the settings for the EZCap, so I think it is still set for PAL instead of NTSC… does anyone know how to get to those hardware settings? I cannot get there via the Device Manager, nor the Devices and Printers in the control panel… not even via Skype, like I used to be able to do. Any hints?

    1. OLA SOU NOVO POR AQUI.
      TENHO UMA PLACA DE CAPTURA KNUP DVR Captura HB-T72 E UM RECEPTOR DE TV DIGITAL AUTOMOTIVO COM SISTEMA ISBD-T, MAIS A PLACA NÃO RECONHECE AS IMAGENS DA TV DIGITAL QUE ABRE NO MEU SOM, COMO FAÇO PARA ABRIR AS IMAGENS NA PLACA DE CAPTURA NO NOTEBOOK COM WINDOWS 10 1909.

    2. Not related but very relevant.

      I planned to use the Honestech/Vidbox Nw03. I had win 7 worked fine until win 7s display files on the internal restore disc files was severely corrupted that I needed to up to Win 10.
      As before opened Magix movie edit pro 17 to find it wouldn’t recognise, Windows Live Movie Maker failed as well BUT Audacity did get the Audio as a test recording.

      So yanking back and forth between vidbox and windows live chats to the point where both were saying its an old device and move it in, not giving up I eventually bought the Easycap but had to use the in browser to record it but it had no sound so I don’t record it but at least I concluded a video signal was coming thru.

      So I thought (after reading up) I’d reinstall VLC back on (I was using Media Player Lite cos it was much better as a player so VLC was uninstalled for the time being) and try the Vidbox and after ticking boxes and tabs I got both picture and sound coming thru BUT i couldnt record it but thats my own inexperience with VLC.

      So now I’ve got to figure out how to get Magix recognise it.

      If this is the shithouse that Windows 10 has created, in my option it’s far more worse than good.

      I could test the latest Magix Movie Edit Pro but that needs $$$ as I had used a trial of it before this molyclob of a problem turned up

  11. Thanks a lot for the info! I bought a no name easycap type device (it’s blue) and it’s not working, but I dont’ know what’s the problem – the drivers, the cable…? I want to transport VHS through it, and in VLC I have “OEM Capture” recognized, but the screen is all black – except for a second of scrambled stuff when I set it up. What is the problem here? If VLC recognized the “OEM Capture” does that mean that the drivers are ok and the problem is somewhere else? Help please! 🙂

    1. Same problem here, Bojan. I got my EasyCAP off eBay from a Chinese vendor, high rating. It included a drive CD and an application called “honesTech”.

      But my symptoms are identical to yours.

    2. I’m so frustrated with this product. It not be allowed to sell. Many people can’t get it to work. I’m using 8.1 windows and never been able to get it to work. There’s no support. I feel it’s a scan.

      1. I managed to get it working in the end, but only with my DVD. My VCR doesn’t come through, maybe cos it has scart, and the DVD has normal RCA outputs.

          1. I’ve tried so many things that I am not sure what did it 🙂 I mostly tried different drivers. I think at least one of these these drivers will help you. And I use honestech software, didn’t work in VLC

          2. and I use Windows 10. I tried different compatibility options, but again, I am not sure that’s what made it work. I guess you just have to try everything

    3. Oem capture is desribed under sound, video and game controllers but no usb device under imaging device. What’s wrong with it? I have tried most drivers but no luck. Any recommendations?

  12. For updating drivers, there are several ways. You can go to device manger to update the easycap drivers. Use the hardware id to go to pcidatabase.com to find the model and then go to the official site to download the driver.

  13. I have the USB\VID_1B71&PID_3002&REV_0100 / USB\VID_1B71&PID_3002 Hardware IDs.. so I tried the links above that matched: EasyCAP_USBVID_1B71&PID_3002_Driver.zip
    EasyCAP_USBVID_1B71&PID_3002_FullCD.zip

    Uninstalled, reinstalled, updated driver, installed the SW.. still getting the same “could not initialize the capture device” error. I figured I’ve messed with driver issues before and would eventually get it, but no dice.

    1. Yes, i can install the drivers from link on top but i can’t use it. (It’s installed as OEM Capture)
      I tried it with honestech TVR 2.5 and VLC on OEM Device stream.

  14. I recently purchased an ‘Easier Cap’ USB 2.0 device from ebay, only to discover, like many, that the bundled drivers didnt allow any output on Windows 10.
    Having inspected the device via device manager I was greeted with this message:
    Device USB\VID_534D&PID_0021&MI_00\6&6af79c6&0&0000 requires further installation.
    And these hardware IDS:
    USB\VID_534D&PID_0021&REV_0121&MI_00
    USB\VID_534D&PID_0021&MI_00

    I tried using a good swathe of the different installers listed on this post but to no avail. On a hunch I checked out the ‘EzCAP’ website instead and voila! Works perfectly!
    The driver is in a simple setup file located here http://www.ezcap.tv/ezcapdriver.zip

  15. Friends…

    The link to EasycapDC60_STK1160Grabber_32&64bit (aka STK1160) is no longer working. Might we be still able to get that file?

    Thank you…!
    Enten

  16. I installed the easycap 4ch dvr. ant time I want to open the channes or turn on any channel, it ask for password. the screen show a user as :Admin and ask for password which I have no idea what it could be. Also when installing the program, at one point it ask for password while having the the same Admin as user name and I put a password but later on, my password has nothing to do with the password they are asking for so I can’t turn On any channel or see anything. please help me

  17. Thanks a whole lot! The Easycap-by-Colour works brilliant on W10. So lucky to be able to convert my 18 year old Hi8’s.

  18. Thanks a lot for the tips I solved my problem with windows 10 and EasyCAP_USBVID_1B71&PID_3002_FullCD.zip . I was looking for a solution during a long time. in fact I used to capture with the USB equipment from Magix but in my opinion the movie colours were a little grewish. easycap was much better (Brighter colours). I also met a problem using Easycap the software included in honestech TVR2.5 (included in the fullCD.zip) did not work so I changed it to Cyberlink power director and I obtained good résult. To summerize my solution is:
    easycap
    EasyCAP_USBVID_1B71&PID_3002_FullCD.zip
    Windows 10
    Cyberlink power director
    Very good job here thanks again

  19. I was able to have my crappy EasyCap 2.0 work in Windows 10 with driver EasyCAP-DC60.zip.

    My EasyCap 2.0 hardware id is: USB\VID_05E1&PID_0408&REV_0005&MI_00

  20. I bought a USB\VID_534D&PID_0021&REV_0121&MI_00 on ebay.

    Unfortunatly it doesn’t seems there are any driver arrivable, i tried every single driver on disc and web. Non of them detecting this device.

    On Windows 10 Microsoft uses some compatibly drivers for this device dated from 2006. The screen is blurry, after 3 seconds its gone, after 6 seconds the device just freeze. I tried it on several computers too.

  21. I have a ezcap usb 2.0 (USB\VID_1C88&PID_1001&MI_00\7&3723DE77&0&0000)
    I tried to load the window 10 drives that came with it, that did not work, then I tried to load driver through device manger ,but got an error windows encountered a problem installing the drivers for your device.
    So I tried toDisable driver signing enforcement, but still had same problem
    any ideas from anybody

  22. Hi –
    I have Windows 10 and a black dongle labeled EasyCap. Windows tried to install a driver, and claimed it succeeded. But VLC Media Player could not see it in Media> Open Capture Device.

    Device Manager showed it as a generic USB 2.0 Video Capture Device, with a yellow warning icon showing that drivers had failed to load.

    Right clicking on my device in Device Manager, and selecting Properties, then the Details tab, then click the Properties item at top, and selecting Device instance path, my device shows:

    USB\VID_05E1&PID_0408&MI_00\6&8B66441&0&0000

    I Googled on the 1st part of that: USB\VID_05E1&PID_0408

    After reading many threads, I came across that mentioned this link as being good for that ID for Windows 7:

    https://www.sabrent.com/download/usb-avcpt-windows-drivers/

    They list the following drivers:

    USB-AVCPT – Windows 7, Windows 8, Windows 8.1, Windows 10 Drivers
    USB-AVCPT – Windows XP Drivers
    USB-AVCPT – Windows Drivers [EMP AUDIO]

    I chose the 1st one, and it worked great.

    VLC now captures audio and video.

    I hope this helps someone.

    1. I did the download, ran the install for the drivers and it WORKS! AMEN, I was so ready to toss this thing into the garbage can. THANKS!!!!!!!!!!!!!!

    2. Unbelievable. This actually worked.
      I download and installed at list 10 driver packages to try and get EasyCAP UB 2.0 to work on Windows 10, until I hit Foonly’s suggestions.

    3. I tried this but when I install the setup, it says “Please connect the video device to the computer, and wait for the installation” so I do as it says and the setup stops completely. I repeat the steps again and the same thing happens.

  23. April 2018 windows 10 update seems to have broken it for me. Device usbtv007 using EasyCAP_USBVID_1B71&PID_3002_Driver.zip was working fine previously. Now ‘Driver is not intended for this platform’ and windows update defaults it to ‘OEM device’ which doesn’t work with capture programs. Any ideas.

    Full error:
    AddService=X86BDA,0x00000002,X86BDA.ServiceInstall (oemdrv.inf line 192)
    Add Service: Binary ‘C:\WINDOWS\system32\DRIVERS\OEMDrv.sys’ for service ‘X86BDA’ is not compatible and has been reverted.
    Error while installing services.
    Error 0xe0000234: Driver is not intended for this platform.

      1. Thank you so much bob I was literaly seconds away from chucking the thing out the window after trying literaly every driver I could find!

        I have the USB\VID_1B71&PID_3002&REV_0100
        and not sure which drivers I used, I could check if anyone needs it but all I had to do is check the Camera setting in PC Settings and it worked right away

  24. I bought EZCAP 116 TV to transfer my Hi8 home videos to digital on my computer. No problems setting up and copying . Initially worked and editing was good. My computer crashed twice and the editing files on Arcsoft disappeared. I am still able to digitize the files to my computer but saved on Arcsoft for editing. Tried to reinstall but did not work. can I uninstall the drivers and start all over again. Will this allow me edit the files previously digitized. Can you help.

  25. hi I have EasyCap usb2.0 video grabber { model no EasyCAP003A version 6.1a which worked perfectly on win 7 unfortunately my hard drive crashed big time so I installed win 10 on new hard drive now tried to install said software along with iTunes as required but win 10 doesn’t recognise the easycap adaptor so having looked at your list of drivers could you give me some idea which may be best it try.
    many thanks
    Colin

  26. Hmm, I have plugged mine in, but I don’t even get an unknown device showing up that I could install drivers for, any ideas?

    1. Plug it in and see if Device Manager doesn’t show a new “OEM Capture” under Sound/Video/Game controllers. If it does, then use it with the default Microsoft driver from Windows and LEAVE IT THE HELL ALONE! Because it either works or doesn’t, searching for driers aren’t gonna make it beterr, quicker or prettier if Windows can run it with it’s own default OEM driver.

      WHY this guy who started this page (or anyone else) is having a challenge getting it recognized in generic Windows escapes me, unless you include USER INCOMPETENCE.

      1. Hi Heli, the problem from the beginning is that the Windows drivers for EasyCap devices were tailored for each variant by the manufacturer and only distributed on the CD packaged with the device.

        The OEM driver available from Windows is a very recent addition but lacks support for the majority of these variants. If your default drivers are working that’s great!

        This resource was prepared and is maintained to help those who are still running into issues.

  27. Thanks a ton for hosting these drivers

    You are helping a lot of people :)…

    I have the STK1160 version but after googling a ton i realized that the EMPIA 2861 version has the best image quality… the UTV007 chip has the worst quality i guess

    1. Friends… I’m hoping that others might assist me.

      I found that I have EasyCaps with three different device IDs (Device Manager / properties on device / Details tab / choose Hardware Ids from dropdown).

      * USB\VID_534D&PID_0021&REV_0121&MI_02
      works well with “EasyCapDC60_64bit.zip” driver… hooray! However, I cannot find appropriate drivers for these next two:

      * USB\VID_1B71&PID_3002&REV_0100
      (I cannot get to work with drivers here carrying that info… even after I change to NTSC from PAL… am I missing something??)

      * USB\VID_05E1&PID_0408&REV_0005&MI_00
      (tried most all drivers, without success)

      Does anyone have tips for me for getting this last two type of EasyCaps to work for them?

      OR… if someone has a source to purchase EasyCaps of a version that they know there are drivers that will work, such as the EMPIA, can anyone point me in that direction?

      Thank you!
      Enten

      1. I can’t get that to even run on both of my computers. I tried looking or the software or drivers online but still can’t get it right. I’m not very techie

  28. Thank you! After trying for hours to find a working driver, one of these worked.
    It may also be of worth to note for others that I discovered a much easier solution using an OTG cable with an Android phone or tablet, if that is an option for you.

  29. I purchased the Easy Capture. My laptop would not run the mini disc that came with it. I downloaded the software through your site. It is asking me for my product key. Any ideas where to get that for the vhs to dvd application.

      1. I found it. Do you know anything about how to shield this device? I keep picking up radio broadcast as I am listening to my tapes and recording them.

  30. hola comparto esto ya que es un gran logro.
    encontre el driver para windows 10 64. para el de 4 canales.adjunto direcccion.

  31. Thank you so much for your efforts in compiling this driver overview! I finally got my SM-USB007 to work now, after digging through dozens of sites that only want to inflict their “driver manager” spyware shit at unsuspecting users.

  32. I have an hp windows 10 computer and ordered the FAVOLCANO Easycap USB 2.0 Audio Video VHS to DVD Converter Capture Card Adapter. The cd I received has nothing to do with the installation. Do you have a link I can use to download?

  33. I have windows 10 64bit and have install EasyCap W7 W10 x64.zip (aka Easycap 4Ch USB DVR W10, W7, x64) , I did the installation and the programme is there but nothing works when I try to transfer a video from a not to hold mini vhs camera. Is it the sofware?

  34. Hello, I have a smi-2021cbe EasyCap and I’ve tried all of those drivers and although some of them have seemed to install properly, I can’t get any program to output any video. The programs find the device, but when I select it, everything is just black. Not even audio. Somehow I think this may not be a driver problem but something else, I would really need help, thanks

    1. ai provato a cambiare l’impostazione video su pal b, e non su ntsc non sono un esperto ma anche io ho avuto qualche problemino e non riuscivo a capire.

  35. I’ve buy an other variant.
    chipset”Etrontech” HW007_V1.1 del 17/05/2016

    I can see video, but this go quickly left-right……

    any help?

  36. In case it’s useful info for anyone –
    I have the utv007 version – on one windows 10 machine it just works out of the box.
    On another (the one I actually want to work!!!) it just won’t work. I’ve tried all sorts of combinations of uninstaling drivers in device manager, updating manually and automatically, multiple usb ports, restart with drivers uninstalled or not and with the device in or not.
    Of the drivers here the only ones that it will even attempt to install are the utv007 ones – but they are not for win 7 or win 10 and don’ work – I’ll post again if I find a fix

  37. 64bit, windows 10 home unit.
    I have installed the exe.file but a password is required.Any ideas/help?
    Thank you in advance!

  38. hi
    thanks for the link
    but after installing it asked me for password
    and my computer leneovo win 10 cant recognize it
    thanks

  39. Thank you so much for the post, the driver EasyCap-W7-W10-x64 work fine for my easy capture.
    However, the serial number of SW honestech TVR 2.5 does not correct, so I can not use the application.
    Do you have any update for this?
    Anyway, thanks a lot for your artical!

  40. Hei..I’ve fot it worked on win 8.1, and it was read as STK1160, But after connected to my camera via ch.1 the display output was black n white on preview mode, is there more further setting on it to be color..?

    1. Black-and-white video usually means NTSC/PAL mismatch. Check what your device outputs and match it, or just go through the dozen-or-so options.

  41. Has anyone faced with “shaking picture” from vcr (vhs) on Ulead Monitor Screen ?
    Looks like need fine tuning on vcr back in days , but it’s not.I tried hook up my Vcr straight to Tv and I got perfect Picture.
    I tested with Win xp, Win7 and win 8.1 ..same issue.

    1. I think i have the same issue.

      Sound is good but picture is shaky, distorted and fluctuates between color and black and white. When plugging VCR into TV, picture is perfect.

      Tested with ulead recording software and VLC, with numerous VHS tapes and numerous vhs decks all with the same result.

      Tried these drivers (and several others including the one that came with the hardware):
      EasycapDC60_STK1160Grabber_32&64bit
      USB-AVCPTSetup_For_Win7.zip
      EasyCap W7 W10 x64.zip
      Drivers_SMI_Grabber_26012011.zip

      OS is windows 7 64 bit.

      Hardware ID is:
      USB\VID_05E1&PID_0408&REV_0005&MI_00
      USB\VID_05E1&PID_0408&MI_00

      Any ideas out there? Please and thank you

  42. From my initial entry on March 4, 2017 at 10:07am. I forgot to mention that I’m using a HP laptop with windows 8.1.

  43. I decided to buy a capture card to convert VHS to PC. I was aware of Easycap from TV sales channels and eventually settled on one sold on Ebay from ‘buy-bar’ for £6.29. When it arrived the wording on the device was ‘Easiercap’. Straight away I knew this wasn’t a genuine article but used the driver disc and downloaded the software anyway. Setting up the device failed to make it work. I had all the connections correct and had watched countless ‘youtube’ without success. My old video player only had SCART and I eventually found a comment where someone commented that they had to but and IN/OUT Scart adapter. I found one on ebay for £1.99 and amazingly setting it to ‘out’, the device worked. I have since converted 2 videos into MP4 without any issues but the editing software on the disc couldn’t be found. That’s not a problem because there’s other editing software available. Although I’m not happy about not having a genuine article, I’m more than happy that I can now convert my video.
    In my unqualified opinion, if it works to convert my precious VHS then its worth spreading the news. Hopefully you’ll find some success with my info. Best of Luck

  44. I discovered my model by inserting my easycap into a win xp laptop – that popped up a message saying the model no & i can now match it to one on your list. Just hope it works now!

  45. Thanks Visser I/O problem solved. Trial & error but eventually it was this driver “EasycapDC60_STK1160Grabber_32&64bit (aka STK1160)” that solved my EasyCap/Windows 10 driver issue. Capture device now working!!

    1. I got this version with Windows 10 but when I install it it tells me to connect the video device and wait for installation? Did you get this message? What is the next step?

      Thanks in advance

  46. thanks so much, finally got this thing working under Win8.1!

    Device: VDGR01-1er bought from Jago,
    registers as: Somagic SMI Grabber (EasyCAP DC60+ clone) (no firmware) [SMI-2021CBE]

    The following driver works:
    Easycap-by-Colour.zip (aka SM USB 007)

    1. I didn’t find any drivers in the Easycap-by-Colour.zip folder for Windows 8.0 & 8.1. There are no applications in the folder that I see. I really would like to get this to work with Windows 8. I need help.

  47. I hate to bother you with this question. Here I go. I got a EasyCap. I broke the disc. Now I need to get in touch with them. I’ve tried everthing to get in touch with them. All I want is to get on line to download it. Sence my disc is broken. I know this is not your line of question. I got the “Product Key number”. I would like your help, if you can.
    I got a Windows 10 ( EasyCap DC60 )

    1. I have problems when try to see the video that I transferred into my PC ,the image quality is not good, any suggestion?

  48. Which driver package from the list should I download to use in a windows 10 environment. The driver and software I received with my Easycap capture device, USB DVR Capture v 4.0A Model No:DC60-007 by honestech is totally useless. The software does not allow us to change the video aspect and as a result we end up with a picture that stretches from top to bottom of screen, but is only about 30cm wide when we try to playback on our bigscreen TV.

  49. Husain Al-Badry, (or anyone else that could help!)
    I have used the driver you found and I now have no issues in the device manager. I have also downloaded and installed Expression Encoder 4, but I could do with some help. I have the Easycap plugged in, how do I get Encoder to recognise or display it? I have a VCR to connect to my Easycap and wish to save a video for later writing to a DVD

    1. I wish I could find a solution for Windows 8.1 I have not been able to get it to work properly. I need help!

    2. Thank you so much…It is the only driver that worked for me.Finally after weeks of finding a solution 🙂
      My grabber is USB\VID_05E1&PID_0408&MI_00

          1. Did you guys have any issues with the sound? I got my pc to recognize the video input but the sound interface is just not there and technically the audio is what I need the most.

  50. Boa noite amigo se eu compra uma peça no meu pc windows 10 64bits ela vai fuciona lega para capturar de câmeras

  51. I just need to know if I need to use the software to use the device. I just want to play my consoles on my laptop

  52. i have easy cap usb2.0 audio/video which is failed in my computer.in the process of converting vhs to dvd video. can you say the solution for this problem?

    1. I had same problem of you using W10 . I converted the first vhs video to my pc correctly and no more. I spent a lot of hours to find a solution. At the end the problem was a malfunction of my video Grabber Easy CAP: the contact inside usb 2.0 port was not correct. I change with a new one and now I started to convert my video again perfectly.

  53. hello.
    I’ve manged to find a driver and install it, now it recognize my Easycap as “stk1160 grabber “.
    now when i try to record from my “Sony video cam player” its record only audio without vidio.
    I use “Debut video capture software”

  54. I have tried to install EasyCap DC60 on my Win 8.1 machine and the machine will not read the disc. As soon as I close it, it pops right back out. I went online and found your downloads and found the whole CD download. After loading and trying to open, it asks for a product key. Any idea where I can get that if I can’t access the CD?

  55. Buenas tardes, deseo saber si alguien logro encontrar solución para los drivers en Windows 10 ya que nunca pude hacer darlos ya le quite la verificación de firmas y ni aun asi me funciona. Si alguien logra hacerlos dar, por favor suban el link directamente de los drivers que si funcionaron. Muchas Gracias desde ya.

    1. Can someone translate this to English. I’m still looking for drivers for Windows 8.1. These drivers aren’t for Windows 8.I or 10.

      1. Not sure what that says in Spanish but,
        The drivers won’t install on 8.1 or 10 unless you run it in an older compatibility mode. Vista should work fine

      2. He said: Good afternoon, I wish to know if you were able to find a solution for the Windows 10 drivers I disabled the signature but it still doesn’t work. thank you .

    1. Good day,
      I also have the same Easier Cap, and it is detected and accessible in Windows 7 64 bit, and named OEM capture. However, there is no sound from the tape, but it records from the microphone. Video is there. Is there another driver to get the sound from yhe VHS tape working?
      Renate

      1. Hi Renate, I have this same issue. OEM capture works for video but does not look like it includes sound.
        did you find a solution. (Easier Cap DC60-007 usbtv007 on Wimdows 10).
        Craig

        1. I have the software you mentioned (Easier Cap DC60-007 usbtv007) and while it does produce both video and audio without problems, there is still an issue with the picture aspect using this driver. There is no selection for 16.9 aspect and as a result I ended up with good audio, but a picture that while it was the correct hieght, but was only 30cm wide. If I change the aspect ratio, then it records audio only and will not record video. I have read from other sights that Easier Cap DC60-007 usbtv007 does not work correctly with anything above windows 2000. It also states within the help file that it is not compatible with Vista, Win7 or 8.

          1. I’m looking for help with Easycap on Windows 8.1 or Windows XP. I haven’t been able to get this device to work. I hope somebody has!

          2. добрый вечер ! я недавно купил (Easier Cap DC60-007 ) и у меня не устанавливается установочный диск который пришёл в комплекту ! система стоит win / 8.1 вместо обычного монитора использую телевизор LG-26LN467U ( 16/9 ) видеомагнитофон тоже LG ! из интернета ничего не устанавливается как быть ? данное приложение не работает honestechVHStoDVD5 ! прошу помощи !

        2. I got the sound working, on windows 10, 2861 type capture dongle.

          Find the audio part of the capture device in device manager and go to change driver, choose the generic sounding “USB audio device”.

          This worked but wasn’t getting garbled sound! I then went to the Sound tab in control panel, went into the properties of the USB Audio Device and in advanced selected 48k DVD quality.

          1. I’m looking for support on Windows 8.1. I can’t get the software to work.

      1. Hi Graham, have a look again. I added the downloads to the main list of downloads as well as updated the URL’s in the comment to link to this domain. I’ll add Mischa’s links to his website to a mirror’s section later today 🙂

      1. I downloaded both links. The driver you state are for Windows 8 are for Windows 7 and Vista. I couldn’t get the program to work. I need drivers for Windows 8.

        1. Joseph, I installed this drivers on my Windows 10 Pro x64 without any problems.

          What happens when you try to update the drivers manually by pointing it to the extracted files?

          1. When I click on the driver application it tells me to update Win-2K to Service Packet 4. When I go to the manual driver 64Bit and click on the application nothing happens. Maybe I’m doing something wrong?

          2. P.S. You could also try the Compatibility Mode when using the software.
            If nothing helps, just update to Windows 10, for me it works flawlessly with it.
            BTW, my drivers are for the Fushicai-chipset (UTV007) and the hardware ID “USB/VID_EB1A&PID_2861&REV_0100”!

  56. Which drivers work with Windows 8.1? I have the Easy CAPture for Windows 2000, XP, and Vista. I couldn’t get it to work on Windows XP either. It would record the video but no audio. Any solutions?

  57. Hi Guys. My Easycap just stop working after last Windows 10 atualization/update, the driver don´t work anymore, and in devices mananger it appears with that yellow exclamation. Any one knows how can I fix it?

    Many thanks!

  58. Just received today directly from China Model # DC60-007 Version 4.0A win 8.
    Installed on Windows 10 without a problem. More when I get into it!
    At less than $8 shipped not concerned if it’s less than perfect.

    1. Did you install the driver that came with the device or did you download it from one of the links above? If you downloaded it, could you please tell me which of them it was?

      1. Forget about my question! The problem was not the drivers, but the latest update on windows 10 (aug 2016). Somehow the update managed to mess up with driver installation. After taking ownership of three folders related to drivers on system32, I was able to get the easycap working.
        Thanks a lot, anyway!

        1. Hi Gabriel. My Easycap just stop working after last Windows 10 atualization/update, the driver doesn´t work anymore, and in devices mananger it appears with that yellow exclamation. Any Do you know how can I fix it? Where have you download this new driver?

          Many thanks!

          1. Hi Romeu. I am not sure this is going to solve your problem, since I did not have the driver installed when I updated Windows. However, I got the same yellow exclamation mark once I plugged the EasyCap. I tried to install the drive (automatically, letting Windows search for it online) and I got the message “This operation requires an interactive window station”. Everything I did to solve the situation is listed on the link below. Just follow Zalyuts instruction!
            https://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/this-operation-requires-an-interactive-window/8fb86cf9-6e6f-429f-8560-51a671807b69?auth=1
            I hope this helps!

  59. hi guys, the driver is working well. but i need the application. i got honestecc in CD. i want to use ulead but when i tried to use the newest corel video studio, thats not supported. can you give me the best application for windows 10?

    Thanks in advance

    Regards

  60. Hi,

    I know this page is about EasyCap but FWIW, it’s spin-off EasierCap works perfectly on Windows 10 x64 .

  61. Hi Folks.
    I use Ubuntu 16.04 and would like to know if there is anyone out there writing Linux drivers for the “eMPIA Technology USB 2861 Device”. There are a number of linux programs that can be used but most of them run from the command line. The software I use on Windows XP works reasonably well but has limitations.

  62. hi guys;
    i need CD/DVD version for easycap usb 2.0 (model number: KX1031) ?
    Up to drivers not work!!!
    OS: WinXP or never x86
    Best regard

  63. hi!
    how can i use the easy cap if i have a mac? (i don’t have the software, i lost it….i have only the usb with the cables…

    thank you!

  64. Thank you so much bro. It not only helped me so much but also saved me from a big disaster. god bless you. J

  65. Hello. I have a Dell notebook with W10he. I tried installing the drivers, but it is not successful. From the “properties” window, I can see my ID Hardware:
    USB \ VID_1B71 & PID_3002 & REV_0100
    I tried to install other drivers, one by one, but the result is the same: either say it is not suitable for this platform or that does not recognize the hardware.
    What else can I do?

  66. Thanks Visser, the SM USB 007 driver worked immediately. Only thing now s that I can’t get anyaudio even though all cables are connected? Anyone any ideas?
    Regards Tomasso

  67. I managed to install the drivers for my EasyCap thanks to this site, and I have managed to acquire and install Ulead VideoStudio.

    But now what? I don’t really understand the process of transferring the video from my camcorder to my PC.

    Do I need to install more software to capture the video??

  68. Hi, I have this system at home including the software, however with all the building alterations the sleeve of the disk was damaged and now I do not have the serial number for my software as I got a new PC and would like to install it. Is there anyway I can get the serial number without having to buy a whole new set of the easycap as I do not want 2 systems.

    1. boas a quanto tempo tem o easycap ?
      mas tente esta senha VHS2G-FVLGG-HGGG8-4E292-GFVGG
      ou TVR25-NMBGG-HGGGH-362DC-6BMG6
      Aguardo se deu ou não

      1. José você sabe como faço uma gravação programada. Ele somente aponta 2 opções de entrada cabo e S-video porém não fala nada sobre entrada RCA.

        Como não tenho S-Video faço opção por cabo porem o vídeo não grava, só o som.

        Obrigado

  69. Hi I have EasyCap:
    USB\VID_1B71&PID_300&REV_0100
    USB\VID_1B71&PID_3002

    and also device manager shows it installed on sound properties as “USB TV TUNER”… Can anyone help me?

      1. I got the Easy Cap, but my laptop does not have a port to put in a disc, so i can not download the software. Does anyone perhaps have a link of what to download. My laptop is HP Windows 10, and the disc is Version 4.0 A win 8. – TVR25-NMBGG-HGGGH-362DC-6BMG6 (those are the numbers at the bottom of the disc, i added it here just incase it is any help.

  70. I have an old ezcap usb 2.0 video capture who was supported on windows xp/vista/7/8 32 and 64 bit

    but now I’ve upgraded to windows 10 and I can’t use the device anymore, because the driver is not suported..

    I still have the box, and it’s white with an Orange and black color it write down Ver36.1

    I have the original CD with the program and sirial number.

    how can I find a driver for that one? please Help.. :/

  71. Thank you for hosting this site. I was able to get this working on Windows 10, using the “Easycap Driver for Win7 64bit.zip (aka STK1160)” driver you posted below. Bill

    1. Hey Bernd, How did you install this? I’m trying to get the Win10_64 that’s in the SM USB 007 file but it doesn’t give me an option to install. Any help would be greatly appreciated! Thanks!

    1. Hi Johnson, thanks for that. I can confirm that that link goes to the Windows Driver (64 bit) package for the Terratec AV 300 MX, worth a shot. If it helps others I’ll mirror it. 🙂

      1. Friends… I’ll be glad to hear if this works for anyone with an EasyCAP device… on the face of it, I’m not sure why a Tarratec device driver would help, but if it does… great!

  72. after many hours of searching i failed to get this to work but a friend help me out he sent me windows 8 drivers for
    dc60++
    OEM Capture
    Usbtv007
    this driver works instantly just install and it comes with a software, just chose the Oem capture as the device in the software.
    already back up all my old |VHS tapes.
    i want to help others so i upload the file
    link:

    have fun

    1. Thanks apyrexia, awesome work! I’ll grab a copy of that download link and host it here as a mirror for others 🙂

      Update: I removed the URL from apyrexia’s comment as Chrome blocked the file download as malicious. Not cool.

      1. Visser, which one of the links goes to this copy? Is it the UTV007_Drivers.zip? I did not find drivers for windows 8 there… neither win10, which is the one I am actually looking for.
        Thanks for the help, anyway!

  73. Thanks for the driver list. It is just a case of try each one in turn until you finally get the right driver for your STK1160. Bird box camera now working well. Nest building has begun, March 2016

  74. I plan to buy the Easycap 4Ch USB DVR, can it connect to software EW/EasyWorship or another webcam software like cyberlink youcam?

  75. I have the EasyCap as shown in the photos.
    I suspect it is working but …
    What audio recording software does it work with? I have some vintage, one of a kind recordings on cassette that I would like to transfer to DVD/CD but I cant figure out how to get the input to a recorder.
    Help
    Thanks
    Bill

  76. Please help me. I have a 4ch usb dvr device. I can not install corectly in windows 8.1 pro x 64
    Chipset syntek 1160
    Device USB\VID_05E1&PID_0408&MI_00\7&1c43f201&0&0000

  77. eMPIA Technology USB 2861 Device. I down loaded these drivers and the device is working perfectly. Thanks for the assistance.

  78. I have the Easycap with Empia chip. Video is OK, but no luck with the audio. After trying several drivers and spending several hours I give up. Or is there anyone that can help me?

    1. On my Vista x64 with driver “Usb 2 grabber” there is no sound but when I record despite its missing and I do “capture video”, and I check the record the sound is there.
      So try to record even if you have not sound and check. Be carefull recording takes a lot of place on hard disk.

    2. I have had my EasyCap for several years (it began life under WinXP) I have run it on Vista, 7 and now on 10. The STK1160 works OK. I have never used the EasyCap to capture audio. Even when it works it has a poor dynamic range and lots of distortion. Much better to feed the audio into line in. You will probably need a twin RCA to 3.5mm stereo coax lead Remember to point your capture software to the correct audio input. My capture software is NCH Debut which is free for non-commercial use.

      1. Yes, this what I ended up doing too – a twin RCA to 3.5mm stereo lead from the VHS audio outputs (left & right / white and red) to computer audio line in.
        Problem solved in 5 minutes. (Although I did have such a cable in my box of spare TV cables in the garage.) Still, an easy fix even having to go out and buy the cable.

  79. Помогите, пожалуйста, с драйвером для Windows 10 (x64):
    SM-USB 007

    USB\VID_1C88&PID_0007&REV_0100
    USB\VID_1C88&PID_0007

  80. Hy!
    I have a Linq EasyCap IT-VC01 usb capture.

    USBVID_05E1&PID_0408&REV_0005&MI_00
    USBVID_05E1&PID_0408&MI_00

    Win7 driver does not work. 🙁 Any ideas?

  81. I thought I had an EasyCap DC60 USB converter but the hardware id I have is very different that what you have. I have: USB\VID_046D&PID_C52E&REV_1500

    I can get video to work but no audio. Any hints/tips would be helpful. thank you

  82. I could use a little help in finding a driver for a USB DVR 4 Channel Surveillance System. I’ve searched with no luck finding it.
    This is the hardware ID:USB\VID_0573&PID_0400&REV_0100

    1. I too have the USB 4channel Surveillance System. I’ve searched with no luck finding it. Did anyone have any ideas? I saw the posted driver list on the previous page, but the 2 drivers listed for this DVR are 64bit. Is there a 32bit Win7 driver? Thanks, Bob.

  83. any idea which ones for this? USB\VID_1B71&PID_3002&REV_0100
    by Active Development Co., Ltd. , I am also on windows 10 -64bit

        1. I really REALLY want to know, I lost my disk for the same hardware ID (but called EasierCAP) and now I can’t take any video from my gaming rigs 🙁

  84. Hi Visser
    I lost my original CD but got my EzCap (SM_USB007) to work. However, none of my video editing software packages (Nero and Pinnacle Studio) are able to import/capture the input from the device. Any idea which free video editing software would do the job?

    1. I was planning on giving the free VLC Player once I get the win7 drivers. Haven’t gotten to that point yet but you might give it a whirl…let me know if you have any luck.
      Google : “VLC Media Player by Terry Pratchett”
      (Video Lan Controller)

      1. Unfortunately that is most likely a bad fake!
        Have tried it on my Win 10 system without success. Additionally the install.exe file in “Driver” has a modification date from 2011 and when unpacking that .exe (as it’s just a self-installing zip package), the files inside are from 2005!
        Sadly there doesn’t seem to be any Win 10 support for the 4Channel version of this DVR grabber :/
        Or do you happen to know a different source?

        The 1 channel version works though.

  85. Hi, friends. Thanks for this page!!

    Like Husain, my hardware ID was:
    USB\Vid_05e1&Pid_0408&Rev_0005&MI_00

    With the driver EasycapDC60_STK1160Grabber_3264bit.zip I could get the EasyCAP to work with Adobe Connect, but not Skype! Skype always gave the message that it could not start the video (and to close other programs… but there were none).

    Does anyone have any ideas that might help?
    Thanks!

    1. Thank you very much; my USB recorder is branded “Easier CAP” instead of easycap, I found this post due to the hardware ID above (which was the same) EasycapDC60_STK1160Grabber_3264bit.zip works for me.

  86. You are a wonderful human 🙂 Thanks so much, I got mine working. For anyone who may be interested, my hardware ID was:

    USB\Vid_05e1&Pid_0408&Rev_0005&MI_00

    I’m running Windows 10. The driver I used was this one from the list above (the grabber STK1160 link):

    http://cloud.visser.com.au/wp-content/uploads/2015/06/EasycapDC60_STK1160Grabber_3264bit.zip

    I used Microsoft’s Expression Encoder to do the recording and it worked really well.

    Thanks.
    Husain

    1. Thanks so much for posting. I have the exact same HW ID and loaded the exact same driver as you did and also have MS Expression. However, I cannot get the SVIDEO to link 🙁 any suggestions? Thanks!

  87. Hi again!
    I`d installed the VKJose drivers pack (your one ask me for win 2K) and It’s seems better but I have no sound.
    My Hardware ID is:
    USB\VID_1C88&PID_003C&REV_0100
    USB\VID_1C88&PID_003C
    Any help will be wellcome.
    Thanks!

  88. Thank you so much for this article. I used the STK or syntek driver for mine. You are awesome! I have put this file into my drivers folder to save for any future installs of this card. Thanks again! Take care!

  89. Hi, thanks!
    When I’m installing pop a windows saying “Please update win-2k version to service packet 4”. I’d check and this update it’s quite old.
    I’m running win10, the file that I’m running the drivers is “ThumbDTV_setup_driver_5.7.129.0”. Any clue please? I`m trying to save very priceless movies (memories).
    Thanks again!

  90. First of all, thanks to visser for the article…

    i made my EasyCap work on Windows 8.1 and now Windows 10, BUT i can’t make it work the Sound, only have Video 🙁

    Any ideas?

    1. Hi SebastIAS, never checked for audio as I was getting a remote video feed from my quadcopter. Does your EasyCap device have the same Hardware ID as ours listed?

  91. Hello. On aliexpress bought Easycap. The CD that came bundled drivers attended only win XP. I’m using Win 10. Drivers for Easycap sought wherever possible! And it so happened that I found on your site. Install the driver package EasyCAP (DC60) (aka STK1160) and the miracle of my Easycap began to work. Thanks a lot! Warmest regards from Russia, Nazarovo Siberian city of Krasnoyarsk Territory.

  92. Hello I got a 4 channel easy capture USB dvr, and the supplied driver is only for Windows xp, I’m using Windows 7, where could I download the driver for Windows 7?
    thanks!

  93. Hi,
    When i plug-in easyCAP, my computer (with windows 10) see it as USB2.0 PC Camera in device manager and assigns a Microsoft driver.
    Then the system do not allow to change it to any other driver provided within this page. When i remove and replug, same is happening. Please advise how to use easycap drivers instead of automatically assigned Microsoft drivers.

  94. It sounds strange but I can not even make an original drivers published on CD with the hardware mentioned above in a Windows 7 x64 environment working. However, both the EasyCAP (DC60).zip and the EasyCapDC60_64bit.zip drivers work in my case. I do have to say a big Thank You!

  95. I’ve got a pretty old easycap (>10 years). I believe I used it with Win98. It still works with Win10 64bit.
    deviceID: USB\VID_05E1&PID_0408&MI_00
    driver: EasycapDC60_STK1160Grabber_32&64bit
    Shows up in the device manager as STK1160 Grabber.

    1. Friends…

      I have a collection of EZ-CAPs (long story–lots of systems)… and can only get one of them to work. I now have five that have a hardware ID of
      USB\VID_05E1&PID_0408&REV_0005&MI_00
      for which I cannot find a driver that will work. Does anyone have a driver that will work with this one? (Perhaps we might start noting what hardware IDs work with the various drivers on the master list??)

      Thank you…
      Enten

  96. Hi!
    I have an easycap for win8 series, without s-video cable (“Easiercap”). I tried work with it, but the picture is always vibrating. I didnt find any driver for it. At all may it a driver problem? Can you help me? Thanks!

  97. you dont have anything for the fushicai model qs702 (usbtv007) or else easycap dc60

    USB\VID_1B71&PID_3002&REV_0100

    i cant find such a thing for windows 8, 8.1, 10.

    could anyone help??

    1. j ai une clé easycap modele DC60. j ai perdu le disque d installation et mon ordinateur est un asus Windows 10 famille 64 bits . je ne comprend l angalis et je ne sais pas quel driver choisir. merci

      1. “je ne comprend l angalis et je ne sais pas quel driver choisir. merci”

        Cher Chaput,

        Nous essayons également de nombreux drivers différents pour voir ce qui fonctionne. D’après ce que vous avez écrit, je suppose que ce un bon endroit pour commencer serait avec le deuxième driver répertorié, “EasyCAP (DC60).zip” … et pourtant cela peut ne pas être la bonne. Il est une question d’essayer jusqu’à ce que l’on travaille!

        Paix,
        Enten

  98. For Windows 10 use Easycap-by-Colour.zip
    Go to device manager
    click update driver on SM USB 007
    Select choose driver
    go to win 10-64 bit folder
    hit install/open.

    1. Hi Omar, compare your Hardware ID against the one I have shown above, if it’s the same then you can use the same drivers that I have installed and working in Windows 10 🙂

  99. I bought an EasyCap from Ebay, came up in Windows XP / Device Manager as “usbtv007”, couldn’t find a 32 bit WinXP driver anywhere for it, so use the Vista 32-bit driver from “UTV007_Drivers.zip” that you posted above, unpacked size 30,377,264 Bytes. The USBTV007 EasyCAP is based on a single UTV007 labelled chip. This device is sold as “USB video capture QS702” from SHENZHEN FUSHICAI ELECTRONIC CO.,LTD, components used : single chip: UTV007 A614231.1 1136L1BK, inscriptions on the board: FSC VIDEO DVR. After a few hours of testing on WinXP 32 bit SP3, it works fine with no blue screens or crashes.

  100. The windows 10 driver is a virus according to panda anti virus. For windows 8.1 none of this works I keep getting drivers not for this platform message, and if I let windows update itself I get driver up to date message.

    1. Hi MP, that’s great to know, I was able to continue using the same drivers installed with Windows 8.1 after upgrading to Windows 10 which was a great surprise!

  101. hola me e conseguido la easy cap pero no funciona con windows 10…
    segun me comentaron q si intalos los drives de windows 8.1 funcionaria pero solo me boto error. espero y puedan ayudarme… saludos!!

  102. Hello Michael, Can you supply a download link for ‘ThumbDTV_driver_5.7.129.0.rar’?

    I have mine working in i.e. VirtualDub but cannot select default PAL resolution (352×288 or 704×576) with it. Other programs, like Windows Movie Maker 2012, do not recognize my device at all.
    I use Windows 8.1 64-bit and native detected Microsoft drivers.

    1. Hi Patrick, I’ll upload the last batch of drivers when I’m back at my workstation on the 14th. Going to update one to Windows 10 and confirm driver comparability 🙂

          1. Have you found drivers that work with Windows 10 64-bit? I’m having a terrible time finding something that works.

          2. Hi Buddy, the same EasyCAP drivers for Windows 8.1 worked for me in Windows 10. I’ve added a screenshot from Windows 10 demonstrating this. Check your Hardware ID’s to see if they match mine else keep trying different driver combinations.

  103. Hi, I have a Easycap 1CH USB DVR for an outside camera. However, the driver that I purchased with this package does not work as Windows 8.1 cannot detect the device driver. Can you PLEASE ASSIST. I tried all the drivers on your website but nothing works.

    1. Hi Suzette, I’ll upload the rest of the missing drivers now since I’m at home. Between each driver install restart your computer and try again.

      1. Thank you. Can you please indicate which driver would be the correct one to install on Windows 8.1. Many thanks.

Leave a Reply to Mark Perry Cancel reply

Your email address will not be published. Required fields are marked *